Bench drilling machine

- Bench drilling machine for drilling light weight pieces of material
- Drilling Diameter: 10-40 mm
- Power Consumption: 600W - 750 W
- No Load Speed: 600-2500 RPM
- Drill Stroke: 80-100 per Minute

Bench top cutting machine

- Cutting machine for cutting different profiles
- Cutting disc diameter - 355mm
- Cutting disc bore - 25.4mm
- No-load speed - 3800 rpm
- Tool dimensions - 256 x 520 x 400mm
- Rated input power - 2400W

Scroll saw

- Depth of Cut (inches): 2 inch
- Variable-Speed
- Stroke Speed - 400-1,750 per Minute

Bandsaw

Output Power - 750 W
Cutting Height - 200 mm
Cutting Width - 310 mm
Power Consumption - 1000 W
Table Size - 500x500 mm

Table saw

Table size: 642 x 572 mm
No-load speed: 3,650 rpm
Saw blade diameter: 254 mm
Cutting height: 79 mm
Saw blade bore diameter: 30 mm
Incline setting: 47 ° L / 2 ° R
Weight: 26 kg
Max. cutting capacity on the right: 460 mm
Max. cutting capacity on the left: 210 mm

Cut off Saw

- Continuous rating input : 2,200W
- Wheel Diameter : 355 mm (14″)
- No Load Speed (RPM) : 3,800
Capacity at 90° :
- Round: 127 mm (5″)
- Rectangular: 115×130 mm (4-1/2″x5-1/8″)
Capacity at 45° :
- Round: 127 mm (5″)
- Rectangular: 115×103 mm (4-1/2″x4-1/16″)
- Vibration Level : 2.5 m/s² or less
- Vibration K Factor :1.5 m/s²
- Sound Pressure Level :102 dB(A)
- Sound Power Level :110 dB(A)
- Noise K Factor :3 dB(A)
- Dimensions (L x W x H) :530x295x640 mm (20-7/8″x11-5/8″x25-1/4″)
- Net weight :18.7 kg (41.2 lbs.)
- Power supply cord :2.5 m (8.2 ft)

Circular saw

Type: Hand HeldItem
Power Input: 1100 W
No Load Speed: 5200 RPM
Saw Blade Diameter: 184 mm
Max Cutting Depth: Cutting depth (90°, 45°): 65 mm, 47 mm

Air Compressor 2hp, 24L

- Weight : 28 KG
- Capacity : 24 Liters
- Voltage : 220 V
- Wattage : 1300 W
- Dimensions : 630 x 315 x 590 mm
- Frequency : 50 Hz
- Horse Power : 1.5 HP

Vacuum cleaner and blower

Rated Input Power: 800 - 1000 W
No Load Speed: 15000 - 18000 rpm
Volumetric Flow Rate: 3 -4.5 m3/min

Small Angle Grinder 4½ Inch

- Cut-off Disc: 4-1/2"
- Length: 10.5"
- No Load RPM: 11,000
Accessories:
- 4-1/2 In. Angle Grinder
- Grinding Wheel Guard
- Auxiliary Handle
- Inner (Clamping) Flange
- Outer (Round Nut) Flange
- Spanner Wrench
- 4-1/2 In. Abrasive Grinding Wheel

Angle grinder with variable speed 5 inch

Disc diameter : 5"
Rated power input : 850 W
No-load speed :2800 - 11000 rpm

Accessories:
Grinding spindle thread : M 14
Rubber sanding plate, diameter : 125 mm
Wire cup brush, diameter : 70 mm

Multi cutter

- Rated power: 300 W
- No Load oscillation: 8,000 – 20,000 opm
- Oscillating angle: 1° - 2 °